Ullman Dynamics at the International Work Boat Show

Ullman Dynamics will be at the INTERNATIONAL WORK BOAT SHOW in New Orleans Dec 2-4 2009.
The complete range of Ullman Seats will be up for display in the BRUNSWICK Boot 3063.

A new high-comfort product will be released: Ullman Daytona, a light-weight bucket seat built for handling extreme impacts.

To book seat-testing visit www.ullmans.com or call + 1 757 383 8386.

Rib International – Rib Magazine Article on Rib Seating

Introduction

“Are you sitting comfortably?” It was quite important when watching children’s TV, but it is also a vital aspect of driving a RIB. If you are not sitting comfortably and securely in a RIB, then you will not only find it difficult to use the controls effectively, but you will also be in danger of injuring yourself when the boat is bouncing about. For the professional RIB, secure and safe seating is vital under the requirement of an employer to have a “duty of care” towards his employees. For the leisure RIB, good seating can add consider ably to the pleasure of driving or crewing in a RIB.

When we first started developing RIBs over 30years ago we needed to find seating which kept the crew low in the boat, but which also offered security. The saddle seat was the preferred option and much of the initial success of the RIB came from using this type of seating. Not only did the seating allow you to grip the seat with your knees as you would when riding a horse, but it also allowed the use of toe straps to give extra security.

The result of using this type of seating was that it left the helmsman with two hands free to drive the boat. With one hand on the wheel and one on the throttle you are in full control and I am sure that much of the success of the RIB and its excellent seaworthiness came from the fact that the helmsman was able to have much better control than on compet ing craft.

One of the alternatives to saddle seating is to stand up at the console. It works well when you can brace your legs against the movement of the boat, but you still need to hold on. Holding on and controlling the boat are not compatible, as the steering wheel tends to become a handhold rather than a control. Today, we have things like shaped bolsters and even bolsters which convert to seats at the flick of a switch so that standing at the helm is a more viable option on larger RIBs.

Saddle and more conventional seating has also come a long way as RIBs have developed over the years. From the wide range of choices available you can find something to suit every scenario, but there are three essential criteria for all seating and bolsters on RIBs: strength, security and shock absorption. These three S’s should govern all seat design.

The human body is a heavy weight when bouncing around in a RIB. It can effectively be several times its own weight under heavy G-forces, hence, the need for strength in the seat design. The need for security is obvious and if the seat can locate you securely then there is less need for white knuckles whilst you hang on! Finally, shock absorption can help to take some of the pain out of the situation when the boat is being driven enthusiastically.

Seating is the key to RIB safety and security. The articles in this section will give some idea as to what is available and what can be done. Seating will also be fully explored in the ‘Safety in RIBS Conference’ being held in Weymouth on the 21st May in conjunction with RIBex’99. Come along and make your contribution to the seating debate.

Dag Pike

The Doctor’s prescription saves lives…and backs.

By using your legs, arms, natural reflexes and a complete new helmsman’s workstation, you can handle fast rescue boats during speed and weather conditions that normally are very dangerous.

Dr. Johan Ullman MD served in the Royal Swedish Navy Reserve when he realised that the majority of drafted men that served as helmsman on the torpedo boats suffered back and neck problems caused by pounding through rough seas at high speeds. The medical problems began to occur within one years service in the Swedish military.

Dr. Ullman, being a professional inventor as well as specialist in ‘Anaesthesiology and Intensive Care in Occupational Medicine’ set out to solve this problem in his normal manner. Assuming that natural behaviour is sound, he claims that `if it feels good, it probably is’. “In actual fact, we find solutions to most ergonomic problems in mans’ own natural behaviour,” he says. “We just have to create machines which let us do what comes naturally. This is where the reflex reactions are adequate and protect you from injury”.

Dr. Ullman has taken a scientific approach to the problem and will soon present his PhD thesis on the subject at the Occupational Orthopaedics, University of Gothenburg, Sweden.

The back and neck injuries are caused by a number of factors. The most obvious are the compression forces that act on your body as the vessel hits or pounds on the surface of the water. A new method of measuring impact on the back was designed by fixing accelerometers to a special kind of kidney belt. We measured up to 7g of compression force on drivers’ backs in the new military vessels.

In normal sitting, the spine forms a `C’ as the back slouches. This shape of the spine causes uneven distribution of weight and impact on the discs and vertebra. The `C-shape’ then becomes more accentuated under the force of impact. However, when standing, the shape of the spine is `S-shaped’ with a natural lordoses (backward bend) in the lumbar region. The same natural S‑shape as that of a rider of a horse.

Other factors to consider include `bending’ and ‘shear’ forces. These may cause discs to rupture as well as fractures of the vertebrae. Shearand bending forces are involved in the so called whiplash trauma, where the weight of the head acts uncontrolled on the cervical spine or neck. People have actually died from this kind of trauma on board RIBS at sea. The more oblique or lateral the direction of the impact, the more dangerous. Added to this, a side impact tends to be harder as the hull hits the wave with a flat surface instead of with the apex of the hull.

By studying the natural behaviour of horseback and motocross riders, it became obvious that both seating positions offered different advantages that could be applied onboard. The horseman has a great advantage by working with fairly outstretched legs, whereas the motocross biker has a great advantage by using his arms for stability and control – both lengthways and sideways.

However, no one would dream of driving a motorbike sitting on a chair, steering with one hand on a steering wheel, and using the other hand for a throttle lever.

In his scientific work, Dr. Ullman has shown that his new system reduces impact on the back from levels well over 3g to below 1g. He has also shown that modern navy boats with regular spring loaded seats can expose drivers to over 7g when the boat is exposed to just 3g.

These results made it absolutely necessary to develop a completely new springing and damping mecha nism. The demands were obvious: lower the weight and volume, double the spring travel, triple the payload capability, no wear, no maintenance, no corrosion and no movable parts.

The end result is now being produced and has found applications in many other areas.

Many people laugh at the steering bar concept, but this is because they haven’t tried it. Once you have experienced the opportunity to control both the steering and the boat speed while holding on to the optimised grips of the handlebar, you will never want to use anything else. Coastguard helmsmen who have tested the steering bar have commented on the feeling of security it provides. “No one should have to be afraid while performing their daily duties,” states Ullman.

Dr. Ullman managed to convince Captain Ake Dagnevik, technical director of the Swedish Coast Guard, into supporting a research and development project that, to date, has generated four generations of prototype boats. “The concept, which originally was a very hard sell in my organisation, has now got 100% acceptance and no one wishes to go back to the old style,” states Capt. Dagnevik.

The concept consists basically of three components:

(1) a saddle like seat with a high backrest;

(2) a newly developed springing and damping mechanism with double composite leaf springs;

(3) a steering bar with twist throttle and gear control. This concept has been tested on outboard and inboard motors, diesel and petrol, drive and water‑jet, single and dual outboard installations.

A total of five 8m RIBs where built by Swedish Coastguard at Nimbus Boats in Gothenburg and donated by the Swedish government to the Estonian and Latvian Coastguards. They were equipped with Volvo Penta KAD42 motors of 230hp and water-jets.

A recent telegram from the Estonian Prime Minister to the Swedish Coastguard relates the account of a rescue mission where three rescue vessels set out to assist a sinking fishing boat. Due to extreme weather conditions, two of the rescue craft were forced to return to shore – one being a new 15m boat. The only boat that could operate in such adverse conditions was the 8m RIB with the Ullman designed workstations! Four fishermen were plucked from the water hours after their boat had gone down.

The latest Ullman design is a 8.5m RIB with foam filled fender collar Fitted with a Penta KAD42 and DPX drive capable of 47kts. The boat takes 6 sitting passengers on the motor box, which also serves as a workbench for resuscitation, and up to 3 laying in the cabin.

The rescue boat is designed to be able to transport casualties quickly, whilst being protected from the wind and spray and the risk of hypothermia. Sadly, people have died on the way home, after having been rescued, on board open rescue boats. Hypothermia at sea claims more lives than drowning. A casualty suffering from hypothermia will continue to lose body heat so long as he is wet and in air cooler than 30°C.

Other special features of the craft relate to the design of the stern which in a following sea gives the aft sections added lift. The boat also incorporates a special raised landing surface which has been designed to make the process of boarding from a larger craft easier.

Continual development and experimentation has resulted in a number of new solutions. Tradition is good, common sense is better, but, paired with medical science, tradition and common sense will give some surprising results.

Johan Ullman

John Ullman MD
Ullman Human Design Group
Johannebergsgaten 30
S-412 55 Gotenburg
Sweden

Tel  +46 31 201500
Fax  +46 31 205056

Email: johan.ullman@ullmans.com
Website: http://www.ullman.org

Ullman Dynamics at METS, Amsterdam

METS is the world’s largest trade exhibition of equipment, materials and systems for the international marine leisure industry organised by Amsterdam RAI in association with the International Council of Marine Industry Associations (ICOMIA).

Ullman Dynamics will be showcasing its new product line for 2011 at METS Trade Show in Amsterdam.

The show will run from tuesday the 16th till thursday the 18th of November.

You will find Ullman Dynamics in hall 11 booth 909.

Ullman Dynamics at Indodefence in Jakarta

The Indodefence show in Jakarta is marking itself on the map.

Yesterday the Indonesian President and Minister of Defense as well as Sri Lanka’s Defense Minister attended the show together with many other visitors and the show has since continued in the same spirit.

Scorpion standardizes the Ullman Biscaya Seat in their new model, Scorpion Strike

The new Scorpion Strike, was revealed for the first time at the Southampton Boat Show.  It is an new step in RIB development with its attention to economy and ecology.

It was obvious that here was a stunning new boat – the Strike had taken RIB’s to a new level and, if it handles as Scorpion claims this is a real World Class RIB.

The RIB has been a joint development with RIBCO of Athens, a long time associate of Scorpion.  They bring their years of practical experience with RIBs and engine setups as well as a wider perspective of the market beyond the UK.  They also provide a testing ground far from prying eyes in the Solent.  It also marks the start of a relationship between Scorpion and Ullman of Sweden, world leaders in shock mitigation and best known for their seats which are well used by the military, in particular Special Forces, and Coast Guards around the world.

Slow Motion Impact Analysis

You will see the difference between sitting and standing

The first seat is the Daytona second and third are Biscaya seats.Slow motion Seablade

 

HSBO Forum 2012 Taking Shape

The HSBO Forum has been recognized as the best venue in the world for exchange of experiences and knowledge, regarding High-Speed Boat operations.

The dates are set and the conference will be held between the 17th to 19th of April 2012.
Admittance is by invitation only.

Stay put on upcoming information.

Ocean Rescue TV

[youtube]fEkW_St8d4U[/youtube]

Ocean Rescue TV
Ride along with Channel Watch Marine and experience the adrenaline of actual ocean rescues. The 26″ Rib “Maverick” features 4 Ullman Jockey Seats.

Ullman VSA (Visual Shock Analysis) Project.

[youtube]xLNsQFhas4Y[/youtube]
Ullman VSA (Visual Shock Analysis) Project.
Filmed from a swedish archipellago fast ferry. Aimed to show the effects of impact and posture at high speed.

DAMEN Interceptor

[youtube]g9eKKGdam3o[/youtube]

DAMEN Interceptor

Action filled video for the new 11 meter interceptor. Runs side by side with a War ship. Top speed 60 knots.

Impressed by the seats performance

Dear Johan,
Lorne Campbell, Jeremy Watts (owner of Ice Marine – Bladerunner manufacturers) and I have just returned from Hawai’i, where we have ridden the Mosquito RIB and experienced your seats for the first time.

I would just like to pass on our congratulations to you on a fantastic design. We (and all at Navatek) are very impressed by the seats performance. I actually took a while to ‘trust’ the seat and let it do some of the work, rather than take all of the forces on my legs, as I would normally do when the conditions are rough!

When I did though I was extremely impressed.
Lorne would like to pass on his congratulations and best wishes also.

Best regards,

John
John Guille
Naval Architect
Navatek Ltd

The new Ullman Atlantic Seats so far are a great success.

Hi!

On behalf the Coast Guard I would like to forward some feedback from the operators of the new ALUSAFE-1050 IKV FPRC.
The boat has been used in rescue, police and customs operations etc….
So far all experience of the boat is only positive.
The boat feels really solid and handles very well in high sea states.
The new Ullman Atlantic Seats so far are a great success.
With boat controls, joystick and plotter controls integrated, the MMI is optimized. This is really good!

Best Regards
Stein Magne Eidissen
Technical Director
Coast Guard SOUTH

Alusafe 1070 FRB & Alusafe 1050 IKV from Maritime Partner on Vimeo.

I come home less tired because I am confident sitting all day during my navigation.

Johan

I want to let you know that the Biscaya seats have changed my life.
As a professional fishing Guide I spend between ten to twelve hours on a rough sea, on a daily base.
I am no more suffering from my back, like I was on my previous boat.
More over I come home less tired because I am confident sitting all day during my navigation.
Even my clients are stunned by the comfort.
I thank you so much for coming up with such a good product

Sincerly

Arnaud de Wildenberg
Photographe-Moniteur guide de pêche

z13

I can drive the vessel at least 10knots faster in a given sea state

Photo credit and driver Chris “Johnsy” Johns of the Albany Sea Rescue Squad.

Hello.

One of our biggest critics is my wife. I don’t mean that in a bad sense.  She is the one that has to find the money to fuel my passion, so when I make a decision to fit 4 Biscaya seats to our next vessel, she suggested my ego was getting the better of me.  However, after the first trial she announced that the best feature of the vessel was the  Ullman seats.

I would endorse that statement, I can drive the vessel at least 10knots faster in a given sea state, for a lot longer than I could with any other conventional suspension seat.  No problems – and I’m an old fart sharing the passion.

Cheers,

Rob Kirby
Kirby Marine
Australia.

IBEX, Kentucky

On the 28th till the 30th of September, Ullman Dynamics will be presenting its unique seats and consoles for high speed boats at the International Boatbuilders’ Exhibition & Conference in Louisville, Kentucky. You will find us in booth number 1151 during the three coming days, where you can receive more information and discuss shock exposure and ergonomics in the marine industry.

All Ullman Seats are designed to enhance efficiency of high performance boats by increasing safety and comfort as well as reducing fatigue and injury risks on crew. The seat design optimizes the body posture while the spring and damping system takes care of the high forces during impact.

To find out more about the company and its products please visit www.ullmandynamics.com

Stay-On Cordura Cover

The Cordura® Cover is a tightly fitted cover for the jockey seat range. It is designed to stay on the seat all the time. Cordura is a heavy duty nylon fabric used in workwear and tactical clothing. It has the highest abrasion grading available. The covers come in various colours. Black is standard.

The stay-on covers are also available in leather (in stead of Cordura) with various colors.

What is CORDURA® fabric?

CORDURA® fabric is what many of the most respected brands, retailers and militaries around the world use when they need to make a product that’s durable, versatile and reliable. Constructed using high tenacity fiber technologies, weight for weight, CORDURA® fabrics are exceptionally durable. Fact is, no matter the application, our fabrics are “best-in-class.” But more importantly, they have to pass our own stringent test criteria before they can earn the CORDURA® brand name. They’re available in a wide range of weights – from ultra lightweight to heavy weight. And CORDURA® fabrics come in many different constructions and textures. All in all, they’re the fabrics that make strong, long-lasting products even tougher in several categories – from outdoor gear and workwear to luggage, military and upholstery.

 

Black Cordura

Front Seat Handle

When Ullman Jockey Seats are mounted without a console or another seat in front, a front seat handle is recommended.

This gives the rider the support necessary to hold and control the body at high impact.

 

Assento tipo sela Ullman Compact 

O assento Compact foi projetado para se ajustar a espaços limitados. Ele ocupa apenas um pouco mais de espaço do que a pessoa que está sentada nele. Ele possui: Alça de apoio em formato de ferradura – para passageiros sentados ou em pé atrás dele. Acolchoamento extra na parte da frente do encosto. Uma bolsa com zíper para equipamentos na parte traseira do encosto

2014 Brochure

-Nuevo folleto -Новый Брошюра

 

Introducing Ullman DAYTONA seat

DAYTONA seat

Unsurpassed comfort and safety for extreme performance boats.The Daytona Seat is a monocoque carbon fibre shell with neoprene or leather upholstery.

The shell is ergonomically designed to follow the shape of the body and put the user in the best position possible.

It features therevolutionising new DDSuspension System (DDSS) which provides 15cm of travel and optimal lateral suspension.